If you need proper USB 3 speed then simply resign yourself to the fact that you'll have to upgrade your Mobo - moden laptops though have decent USB 3 ports. 6 in 1 USB-C Hub 3.0 Typr-C Hub to 2 USB 3.0 SD/TF Card Reader PD Charging Docking Station Type C Adapter Hub for PC Laptop US 7.55-14.00 / Piece 20 Pieces (Min. You can probably connect 2 or even 3 USB 3 HDD's to a POWERED USB3 hub without too much reduction of speed or I/O transfer.īaring in mind that a typical USB 3 external drive (passport type of self powered variety) probably will only give up to 110 - 200- Mib/s on USB 3 port (Mib/s - not MB/s) anyway you won't have any problem connecting another 2 or even 3 USB 3 devices to a decent USB 3 hub, It needs to be powered of course for maximum performance.Īs for USB 3 expansion port cards on older MOBOS that never had native USB 3 ports - IMO they are usually a waste of time since they connect to the BUS which doesn't have USB 3 speed in the first place.
So even 2 or 3 devices will work just fine on a USB 3 Hub provided there is enough power supplied to the devices.
#USB 20 HUB AC WINDOWS#
Most USB3 HDD's (that's what most people use a USB 3 Hub for anyway) don't have anything like enough speed to limit the USB 3 hub speed - as well as most I/O will be done reasonably well by Windows anyway. There's NOTHING WRONG in using a USB3 hub - provided it has enough power to drive the devices connected to it. Notice that the cables are sleeved (wrapped), which makes the installation look cleaner and for a $25 product it was nice to see NZXT still do nice finishing touches like this.Actually it's a bit more complex than that. This is a big issue on older systems where the power supply might not have any available power connectors. NZXT included a pass-through 4-pin molex connector, which is nice as you can run other devices off the power header. im guessing the commander dose for the hub but i would think the core should work with just one. you can buy a splitor for the usb 2.0 but i dont no if the core or commander need both to work. and the usb 3.2 should be backward compatible with usb 2.0 with an adapter. The 4-pin molex power cable is required as the NZXT hub plugs into a standard two port heard, yet powers an additional controller chip and up to eight devices! That will obviously draw more power and as a result the power plug is required. so you have 2 set of usb 2.0 and and usb 3.2. Inside the NZXT IU01 USB Expansion retail box you’ll find the expansion board itself, a basic multi-lingual instruction manual, 4-pin molex power cable and a USB 2.0 9-pin internal header cable. Since this is just an internal USB hub, we will jump right to it as USB technology needs no introduction to our audience.
#USB 20 HUB AC BLUETOOTH#
The IU01 also adds six internal USB ports that are great for powering items that you don’t need constant access too like a Bluetooth module or USB wireless router allowing you to free up the external ports for additional accessories.” – NZXT The IU01 enhances control and boosts power for front-panel USB devices by connecting them directly to the power supply as opposed to the motherboard, ensuring that there is always enough power to control your accessories and peripherals. “The IU01 addresses an issue common to most gaming PCs that is a lack of substantial power and expandability from the front-panel USBs.
The back of the retail box has this paragraph about the device. I dont know the model, but its this one: Im on Ubuntu 20.04 with kernel 5.10.0-051000rc6-lowlatency. Not the best packaging for the retail shelf, but for online orders it should do okay. The retail box is rather plain and while the NZXT brand name is displayed in a large font, the rest of the text and the product name is rather hard to see. Shop online and read reviews for Orico 4 Port Essential Desktop USB 2.0 Hub, 4x USB 2.0, ideal for USB Keyboard, Mouse, Wifi Adapter Extension ( W5P-U2 ) at.
0 kommentar(er)
